— Excerpt from the Top Secret military transcripts published in the book ALIEN INTERVIEW.
FOOTNOTES:
[i] “… Tiahuanaco…”
“Tiwanaku monumental architecture is characterized by large stones of exceptional workmanship. In contrast to the masonry style of the later Inca, Tiwanaku stone architecture usually employs rectangular ashlar blocks laid in regular courses, and monumental structures were frequently fitted with elaborate drainage systems. Bronze or copper “double-T” clamps were often used to anchor large blocks in place. The stone used to build Tiwanaku was quarried and then transported 40 km or more to the city. They were moved without the aid of the wheel, though much of the distance was over water.
The community grew to urban proportions (in antiquity) becoming an important regional power in the southern Andes. Satellite imaging was used recently to map the extent of fossilized suka kollus across the three primary valleys of Tiwanaku, arriving at population-carrying capacity estimates of anywhere between 285,000 and 1,482,000 people.
They worshipped many gods, and one of the most important gods was Viracocha, the god of action, shaper of many worlds, and destroyer of many worlds. He created people, with two servants, on a great piece of rock. Then he drew sections on the rock and sent his servants to name the tribes in those areas. In Tiwanaku he created the people out of rock and brought life to them through the earth. The Tiwanaku believed that Viracocha created giants to move the massive stones that comprise much of their archeology, but then grew unhappy with the giants and created a flood to destroy them.”
— Reference: Wikipedia.org
[ii] “…Ollantaytambo…”
“Ollantaytambo is a town in southern Peru, located in the district of Ollantaytambo, province of Urubamba, Cusco region. It is approximately 60 km to the northwest of the city of Cusco, situated at an altitude of 2792 meters above sea level.
The city of Ollantaytambo is best known for its ruins, and for the spot where the Inca emperor Manco Inca was able to defeat the Spanish in a set-piece battle. The finely cut rocks and plantation terraces were very large obstacles for the Conquistadors to surpass, and the fortress was also used by Manco to conduct successful attacks on Francisco Pizarro and other Conquistadors who were based in Lima.”
— Reference: Wikipedia.org
Machu Picchu (Quechua: Machu Picchu, “Old Peak”) is a pre-Columbian Inca site located 2,400 meters (7,875 ft) above sea level. It is situated on a mountain ridge above the Urubamba Valley in Peru, which is 80 km (50 mi) northwest of Cuzco. Often referred to as “The Lost City of the Incas”, Machu Picchu is probably the most familiar symbol of the Inca Empire.
One theory maintains that Machu Picchu was an Inca “llacta”: a settlement built to control the economy of the conquered regions. It may also have been built as a prison for the selective few who had commited such henous crimes against the Inca society. Research conducted by scholars, such as John Rowe and Richard Burger, has convinced most archaeologists that rather than a defensive retreat, Machu Picchu was an estate of the Inca emperor, Pachacuti. In addition, Johan Reinhard presented evidence that the site was selected based on its position relative to sacred landscape features. One such example is its mountains, which are purported to be in alignment with key astronomical events.
Shamanic legends say that if you’re a sensitive person and you rub your forehead against the world-famous Intihuatana Stone you will see the spirit world. The Intihuatana stone is one of the many ritual stones in South America. They are arranged so they point directly at the sun during the winter solstice. The Spanish did not find Machu Picchu until the 20th century so the Intihuatana Stone was not destroyed like many other ritual stones. It is also called “The Hitching Point of the Sun” because it was supposed to hold the sun in it’s place. It is (as they said before) believed to be an astronomic clock built by the Incas.”
— Reference: Wikipedia.org
[iv] “… Pachacamac …”
“The temple of Pachacamac is an archaeological site 40 km southeast of Lima, Peru in the Valley of the Lurín River. It had at least one pyramid. They used Pachacamac as primarily a religious site for the veneration of the Pacha Kamaq creator god. The Ichma joined the Inca empire and Pachacamac became an important administrative center.
However the Inca maintained it as a religious shrine and allowed the Pachacamac priests to continue functioning independently of the Inca priesthood. This included the oracle, whom the Inca presumably consulted. The Inca built five additional buildings, including a temple to the Sun on the main square.”
— Reference: Wikipedia.org
[v] “… an electronic, light-wave emitting stone cutter and carving tools…”
“There are various laser cutting tools depending on the type of finished product that you prefer. Laser cutter routers that are computer-driven can cut each letter precisely, capturing every detail of the selected style. The said manufacturing systems are useful in cutting out symbols and logos in a cost effective manner.
Laser that is in a solid state uses one crystal rod with flat and parallel ends. Both ends have surfaces that have the ability to reflect. A light source that has high density and a flash tube surrounds the crystal.
When power is given by the network of pulse-forming, an intense light pulse called photon is released in one of the rod crystals. The light released is one wavelength and allows for minimum divergence.
A hundred percent of laser light is reflected on the rear mirror while thirty to fifty percent will pass through the mirror then to the shutter assembly to the angled mirror before going down through the lens and then to the work piece.
The laser light beam is not only coherent but also has high energy content. When it is focused on the surface, the laser light creates heat used for welding, drilling, and cutting.
The laser beam and the work piece is manipulated through the use of robotics. It can be adjusted to different sizes and heat intensity. The smaller laser is used for drilling, cutting, and welding while the larger machines are used in off giving heat.”
— Reference: http://ezinearticles.com/?Laser-Cutting-Tools&id=352889